Heat pump installation in Cape Town, with an honest answer first

Old geyser finally given up? Before we quote, we check if you even need a heat pump. Sometimes the honest no saves you the whole spend.

Shop geyser products

1,200+ geysers replaced
Twelfth Year Trading
Sixteen Years on Tools
Quoted Before Fitting

Klipspringer Plumbing fits heat pumps for homes across Cape Town, from Muizenberg and Fish Hoek to Lakeside and Tokai. You WhatsApp us a photo of the old tank and the space around it. We tell you straight whether a heat pump fits your house or whether a cheaper swap does the job. Either way, you get a price that holds and an invoice that matches it, so the bill never shocks you.

When you need Heat pump installation

A new box only saves you money in the right house. An old geyser costs you money in any house. Yours is eating electricity every month. The bill climbs each winter. You start wondering if a heat pump would cut it.

Maybe the geyser is near the end anyway. Pre-1980 homes often run the original tank. Once it starts rusting or tripping the mains, patching it is money down the drain. A heat pump can halve the cost of heating your water, but only in the right house.

The first thing we do is not sell you one. You send a WhatsApp photo of the geyser and the space around it. We tell you straight whether a heat pump suits your roof, your walls and your electrics. Or whether a timer and a newer element would serve you better for far less. For wider background, see Buying green heating and insulation products: a consumer guide (GOV.UKGOV.UK).

How Heat pump installation works

You WhatsApp us a photo of your geyser and the space around it.
We tell you whether a heat pump fits your home, or whether a cheaper fix does the job.
If it fits, we quote you a price that holds. No surprise line items later.
We install the unit, test it and hand you a Certificate of Compliance arranged through our team once the job is signed off.
You get before and after photos and an invoice that matches the quote.

Heat pump installation costs

So what makes up the price? The unit size, how far it sits from the geyser and what your electrics need. An awkward roof run or a tight side passage adds labour.

We name a figure only after we have seen the photo. Where needed, we check the site too. Nothing gets invented up front to win the job. What we quote is what you pay and the invoice proves it.

Why choose Klipspringer for this

Call-out (trip and first assessment, first 30 minutes)

R450 excl. VAT — trip and first assessment, first 30 minutes
WhatsApp reply within the hour

Send a photo of the problem on a weekday and you will hear back within the hour, not at the end of the day.
The owner signs your certificate

Zaid, the owner and master plumber, checks the job himself and signs your certificate of compliance. Not a stranger passing through.
The quote is the invoice

The price we quote you is the price on the bill. No extra line items once the job is done.

Jobs we've done recently

Real call-outs, written up the same week they were done.

Tokai September 2026

A salesperson told this family they needed a new geyser and a big solar system. We checked first. The geyser was healthy and the roof was shaded by oaks, so solar made no sense. A heat pump on the garage wall was the honest answer, and their old geyser stays in service.
Constantia July 2026

A family of five. We fitted a 4.5 kW heat pump onto their 200 L tank, which was in good condition, so it stayed. We set the timer for morning and evening.

Frequently asked questions

Do you back your heat pump installations with a warranty and support afterwards?

We stand by every install we do and you have Zaid's number if anything feels off afterwards.

Will a heat pump still work for me during load-shedding?

Most heat pumps run fine once power's back, but check your inverter setup with us before we fit.

Which heat pump brand do you recommend and can you service it afterwards?

We fit units suited to your roof and electrics and we service what we install, no handballing to someone else.

What does heat pump installation cost in Cape Town?

Heat pump installation (onto existing tank): from R24 500 excl. VAT. Call-out (trip and first assessment, first 30 minutes): R450 excl. VAT. Labour, after hours, weekends and public holidays (per hour): R950 excl. VAT per hour: per hour, after hours, weekends and public holidays. R650 excl. VAT per hour, weekdays 07:30–17:00. Call-out: R450 excl. VAT (trip and first assessment, first 30 minutes); after hours, weekends and public holidays: R950 excl. VAT per hour (Labour); After-hours: R850 excl. VAT (call-out); always quoted before we fit them: cost plus a fair handling margin (Parts).

How long does a heat pump installation take at my house?

Most installs are done in a day, depending on the roof run and how your electrics are set up.

Will the invoice match what you quoted me, with nothing added after the fact?

Yes. The price we send after seeing your geyser is the price on your invoice, no extras.

Explore more

Work out if a heat pump is right for your Cape Town home
Four quick checks to see if a heat pump suits your household

Stop pouring money into that old geyser

That old geyser drains power every month. Elements burn out. Tenants phone after hours. Call-outs stack up while nothing really changes.

Whether you spotted it or your tenant did, message us a photo on WhatsApp and we'll quote a heat pump installation up front, so you know the running cost before we lift a tool. If you'd rather compare it with a new geyser first, our Geyser services lay out every option.